
Add to Cart
1×2 Multi-Mode Optical switch
Features
Applications
Specifications
Parameters | Unit | TZ-FSW-1×2 | |
Wavelength Range | nm | 650~1310 | |
Test Wavelength | nm | 650/780/850/980/1064/1310 | |
Insertion Loss 1, 2 | dB | Type:0.6 | Max:1.0 |
Return Loss 1, 2 | dB | SM ≥ 30 | |
Crosstalk 1 | dB | SM ≥ 35 | |
PDL | dB | ≤0.05 | |
WDL | dB | ≤0.25 | |
Repeatability | dB | ≤±0.02 | |
Operating Voltage | V | 3.0 or 5.0 | |
Durability | Cycles | ≥ 10 Million | |
Switching Time | ms | ≤8 | |
Optical Power | mW | ≤500 | |
Operating Temperature | ℃ | -20 ~ +70 | |
Storage Temperature | ℃ | -40 ~ +85 | |
Relative Humidity | % | 5 ~ 95 | |
Weight | g | 14 | |
Dimension | mm | (L)27.0×(W)12.6×(H)8.5 ±0.2 | |
Note: 1 Within operating temperature and SOP. 2Excluding Connectors. |
Pin Configurations
Type | State | Optical Route | Electric Drive | Status Sensor | ||||||
1×2 | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2-3 | Pin 3-4 | Pin 7-8 | Pin 8-9 | ||
Latching | A | P1-P2 | V+ | GND | --- | --- | Open | Close | Close | Open |
B | P1-P3 | --- | --- | GND | V+ | Close | Open | Open | Close | |
Non- latching | A | P1-P2 | --- | --- | --- | --- | Open | Close | Close | Open |
B | P1-P3 | --- | GND | V+ | --- | Close | Open | Open | Close |
Electrical Specification
Specifications | Voltage | Current | Resistance | |
5V | latching | 4.5~5.5 V | 36~44 mA | 125 Ω |
5V | Non-latching | 4.5~5.5 V | 26~32 mA | 175 Ω |
3V | latching | 2.7~3.3 V | 54~66 mA | 50 Ω |
3V | Non-latching | 2.7~3.3 V | 39~47 mA | 70 Ω |
Ordering Information
Fiber Type | Voltage | Switch type | Test Wavelength | TubeType | Fiber length | Connector |
M5:MM, 50/125 | 3:3V | L:Latching | 65:650nm 78:780nm | 25:250um | 05:0.5m±5cm | FP:FC/PC,FA:FC/APC |
85:850nm 98:980nm | 90:90um | 10:1.0m±5cm | SP:SC/PC,SA:SC/APC | |||
M6:MM,62.5/125 | 5:5V | N:Non-latching | 1064:1064nm | 20:2.0mm | 15:1.5m±5cm | LP:LC/PC,LA:LC/APC |
X: Others | 13:1310nm | 30:3.0mm | X:Others | OO:None,X:Others |