
Add to Cart
Polarization-Insensitive High-Power Isolator (1064 nm, up to 2W)
Polarization-Insensitive
Low Insertion Loss
High Isolation and Return Loss
High Reliability and Stability
Fiber Amplifier
Fiber Laser
Testing Instruments
Mopa Fiber Laser
Center Wavelength (nm) | 1064 |
Operating Wavelength Range (nm) | ±5 |
Typ. Peak Isolation at 23℃ (dB) | 35 |
Min. Isolation at 23℃ (dB) | 28 |
Max. Insertion Loss at 23℃ (dB) | 1.7 |
Max. Insertion Loss at 23℃ and Input Power 300 mW (dB) | 2 |
Max. Insertion Loss at 23℃ and Input Power 1 W (dB) | 2.5 |
Max. Insertion Loss at 23℃ and Input Power 2 W (dB) | 3 |
Max. Polarization Dependent Loss at 23℃ (dB) | 0.2 |
Min. Return Loss (Input /Output) (dB) | 45 |
Max. Average Optical Power (W) | 2 |
Max. Peak Power for ns Pulse (kW) | 10 |
Max. Tensile Load (N) | 5 |
Operating Temperature (°C) | +10 to +50 |
Storage Temperature (°C) | 0 to +60 |
Note:
1. The polarization-insensitive high-power isolator (1064 nm) is customizable, and the above specifications are subject to change
without notice.
2. For device with connectors, IL is 0.3dB higher, RL is 5.0dB lower.
3. Bare fiber should not support the weight of the connector. So that if you need any connectors, it's better to choose the 900μm
loose tube jacket instead of the 250μm bare fiber.
4. For product customization, please contact our sales department for availability.
Ordering Information for Polarization-Insensitive High-Power Isolator (1064 nm) | |||||||
Wavelength | Fiber Type | Package Dimension | Pigtail Type | Fiber Length | Connectors | Average Power | Peak Power |
1064nm | HI1060 | 33x17x11.5 mm | 250μm bare fiber | 0.5 Meter | None | 1W | 10kW |
SMF-28e | Specified | 900μm loose tube | 0.8 Meter | FC/UPC | 2W | 20kW | |
1.0 Meter | FC/APC | ||||||
Specified | SC/UPC | ||||||
SC/APC | |||||||
LC/UPC | |||||||
LC/APC | |||||||
Others |